|
TAPs
|
|
Wednesday, 10 December 2008 |
This TAP intercepts the Topfield’s shutdown command and informs the other TAPs about the planned shutdown. The other TAPs now can save their data onto the hard drive or perform other tasks. It is even possible to temporarily cancel the shutdown to carry out a longer job. In this case, it is up to the canceller to reinitiate the shutdown at a later time. In addition, the SDS displays a dialog, when a user presses the standby button while a recording is running. In contrast to the original Topfield dialog, SDS does not allow to stop the recording, so an accidental interruption is not possible. A startup channel and volume may be configured via the configuration file.
Users with a TF5500 VFD will get status information about the current shutdown state.
Download from topfield.cc
Author: FireBird | |
 Be first to comment this article | Views: 6300
|
|
|
TAPs
|
|
Tuesday, 05 February 2008 |
An EPG tap for the purist. It doesn't offer more functionality than the original Topfield EPG but it's nicer and faster.
Download
Author: ibbi
| |
Be first to comment this article | Views: 8426 |
|
|
TAPs
|
|
Friday, 24 August 2007 |
With ProfileEditor you can customize the skin off TAP's that uses FireBirdLib for the dialog screens and menu’s
The following TAP’s support ProfileEditor at this moment:
EPPG
SimpleCharEditor
FileSelector Modul
ProfileEditor
Download
Author: FireBird
|  |
Be first to comment this article | Views: 2077 |
|
|
TAPs
|
|
Wednesday, 07 November 2007 |
This TAP removes the “ playback stopped” message after playback ends.
If you’re wondering what the WWWW stands for “Warnung Wiedergabe Warten wegdamit”
This TAP has a patch ID: [Ww]
Download from topfield.cc
Author: FireBird
| |
Be first to comment this article | Views: 4964 |
|
|
TAPs
|
|
Tuesday, 28 August 2007 |
Small TAP that deletes the "__tempcut__.rec" file sometimes left behind in the DataFiles folder after trimming a recording.
Download
Author: Bauke
| |
Be first to comment this article | Views: 3504 |
|
|
TAPs
|
|
Friday, 22 February 2008 |
TAP to check the condition of data structure on the hard disk.
This TAP should be run immediately after booting without any other TAP’s running and TF turned off.
Download
Author: ibbi
| |
Be first to comment this article | Views: 4865 |
|
|
TAPs
|
|
Monday, 08 October 2007 |
This TAP lets you (re)set the crypt flag.
Download
Author: Sigittarius-E | 
|
Be first to comment this article | Views: 2548 |
|
|
TAPs
|
|
Friday, 09 November 2007 |
With ToggleRecHeader you can change the Header of a Topfield Rec file.
Download
Author: Sigittarius-E
|  |
Comments (1) | Views: 2446 |
|
|
TAPs
|
|
Monday, 14 July 2008 |
CutFile splits a file at the bookmark positions. If these bookmarks have been placed (accurately) by AccurateBM then this will have the effect of cutting the programmes out of a single .rec file into their own .rec files (i.e. de-merging the merged recordings that might be produced by various TAPs). If the bookmarks aren't very accurate then you can adjust them using the native Toppy playback search bar and the Green and Yellow buttons.
To make best use of the cutter you'll need the v3.8l6 or newer of DX's mei2archive (at time of writing, this is the test version) -- this will ensure that the cut parts have nice names and the header is filled in with the right programme. Alternatively (or if you select the file using the Play button) the cuts parts will be named "CUT_XYZ.N.rec", where XYZ is a combination of the channel name and the start time of the original recording and N is a sequence number. In all cases, however, the first part (usually the pre-padding) will not be renamed and the description will not be adjusted. This is partly because those will most likely be roughly correct, but primarily so that the JoinFile can put everything back to how it was before. The names of the other files that are produced are briefly displayed during cutting, and can also be found in FILE.cut, where FILE is the original filename. This file is required by:
JoinFile reverses the actions of CutFile, using the .cut file that it produces. It checks the contents of the parts and will not join arbitrary files. (If successful, the .cut file is deleted.)
CutAds is a little bit like CutFile but in this case the each pair of bookmarks should mark the start and end of a section of the programme, so the first bookmark should be placed at the start of the programme. The ads are cut from the file into a FILE-ADS.rec file, where FILE is the original filename -- this should be a fairly small file and is probably best deleted (it's not done automatically in case the bookmarks had been placed incorrectly). This change is bookmark-accurate and destructive (cannot be reversed), so take care. Most importantly: make sure you have the first bookmark at the start of the programme (this may not be placed by AccurateBM if your pre-padding is not long enough to include ITV's idea of the programme "start", which is often at the end of the preceding programme).
JoinAds reverses the actions of CutAds, using the .ads file that it produces. (If successful, the .ads file is deleted.)
Download CutFile, JoinFile, CutAds, JoinAds
Homepage
Author: R2-D2
| |
Comments (2) | Views: 4568 |
|
|
TAPs
|
|
Thursday, 08 May 2008 |
Media Manager is a TAP which has 3 components:
Photo Manager allows you to view JPEG images on Topfield. You can start a slideshow manually, or automatically whenever you switch to a radio channel or play an MP3. Recent functionality includes several Screensaver modes which can be used while listening to music.
Music Manager allows you to play MP3s. Various play modes allow music to be played randomly or sequentially, either a single folder (album) at a time or including all subfolders too. The Music Manager can be used in conjunction with the Photo Manager to provide flexible album art modes.
Video Manager allows you to play video recordings. It can be configured to create thumbnails and scenes of the video to give a DVD like presentation. Videos can also be moved, renamed or deleted.
Some changes since 1.4: - Switchable fonts.
- Multiple delete and move.
Download from homepage
Homepage
Author: Mark Riley |
 |
Be first to comment this article | Views: 20668 |
|
|
TAPs
|
|
Sunday, 19 November 2006 |
Be first to comment this article | Views: 2401 |
|
|
TAPs
|
|
Wednesday, 07 May 2008 |
This TAP adds supercharged PiP functionality into your Topfield PVR.
Features include: - Simple and intuitive interface
- Fully adjustable window sizes and positions
- Radio mode
- Highly configurable
Download
Homepage
Author: Mark Riley | |
Be first to comment this article | Views: 23609 |
|
|
TAPs
|
|
Tuesday, 24 October 2006 |
Photo Manager allows you to view JPEG images on Topfield. You can start a slideshow manually, or automatically whenever you switch to a radio channel or play an MP3. Recent functionality includes several Screensaver modes which can be used while listening to music.
This is a spin off from Media Manager, which splits off just the Photo Manager component. It is provided for people who do not want all the other features (and menu options) of the full Media Manager.
Download
Homepage
Author: Mark Riley |  |
Be first to comment this article | Views: 4747 |
|
|
TAPs
|
|
Thursday, 08 May 2008 |
Be first to comment this article | Views: 3462 |
|
|
TAPs
|
|
Wednesday, 22 August 2007 |
This Topfield TAP is an attempt to stop some component display problems that some TVs seem to have with the Topfield.
The symptoms of the problem are a display that twitches or jumps or loses sync on component output (especially with PIP on) but works fine with composite or s-video. With the problem starting when the Toppy has been on a teletext channel (like Seven in Australia) since being in standby.
Download
Author: cttc | |
Be first to comment this article | Views: 1406 |
|
|
TAPs
|
|
Sunday, 09 December 2007 |
This jumping TAP can be used as a binary search jumper (halves the jump time every time the jump direction changes) or as a normal jumper (button X jumps Y seconds). This TAP also adds a stop menu into your Topfield, which can be used when stopping playback.
Only available in Finnish and this won't change.
Download
Author: Jari Räisänen
| |
Comments (1) | Views: 9912 |
|
|
TAPs
|
|
Monday, 03 March 2008 |
Be first to comment this article | Views: 3600 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Logs used channels and shows statistics of those. Use UHF key (I quess) to see statistics.
Download
Author: Acade |  |
Be first to comment this article | Views: 2475 |
|
|
TAPs
|
|
Sunday, 17 August 2008 |
Shows Topfield's signal levels and qualities for each of the Muxes for both tuners.
Download
Homepage
Author: EMJB |  |
Be first to comment this article | Views: 7392 |
|
|
TAPs
|
|
Saturday, 19 April 2008 |
Moves files to the directory, which has the same name as the recording. Handy for automatically moving eg. series under series own directory. For example "Yes minister 2005-05-05.rec" would be moved to a directory "/Datafiles/Yes minister" or "/Datafiles/series/Yes minister". There is also list of the 30 last moved files.
Changes: Automove Version 1.9 beta 2
===========================
-Bug fix for 3PG's description separator, the soft/discretionary hyphen
-The character that separates the description must be configured
-In the configuration, option 1, help text, you can see the time and duration of the last run
Automove Version 1.9 beta 1
===========================
-Now Automove also can cope with "Lost - Episode 15.rec" oder "Lost ~ Episode 15.rec" by recognizing the characters - and ~. This also works for History Move. Users of 3PG or Stirf can now use Follow Me again.
-Automove now ignores all files "3PG*.rec". These files are used for 3PG's recorder scan.
-Automove now has got TAPCOM support for RecCopy TAP. If switched on Automove only moves files that recordings from encrypted channels are only moved after RecCopy has scanned it for errors. At least RecCopy 4.1 is needed.
Download
Author: Happy (Till Hepke) |  |
Be first to comment this article | Views: 13349 |
|
|
TAPs
|
|
Saturday, 05 January 2008 |
Be first to comment this article | Views: 2763 |
|
|
TAPs
|
|
Sunday, 03 December 2006 |
Removes the Topfield Progress Bar, when it's been visible for 10 seconds.
Changes since 1.12:
- Corrected a firmware bug that can result in a buffer overrun, which freezes the Topfield.
Download
Author:
This email address is being protected from spam bots, you need Javascript enabled to view it
| |
Be first to comment this article | Views: 3053 |
|
|
TAPs
|
|
Tuesday, 16 January 2007 |
This TAP reads header data from Topfield's .rec files and writes it into TFHead*.log files.
Download from topfield.cc
Author: FireBird | |
Be first to comment this article | Views: 2635 |
|
|
TAPs
|
|
Monday, 01 January 2007 |
Daylight saving time (DST) changes, can cause problems when creating timers before the DST change actually has happened. For example, if the DST switches to winter time this Sunday, the 18 o'clock program of next week, will currently appear in the EPG at 19 o'clock. When you try to record it, you will get the wrong program instead.
If you reload the EPG on Sunday, it has moved back to 18 o'clock, but your timer will still be set at 19 o'clock. With this TAP, 18 o'clock of next week, will appear in the EPG at 18 o'clock, both before and after Sunday.
Download
Homepage
Author: bdb | |
Be first to comment this article | Views: 3252 |
|
|
TAPs
|
|
Tuesday, 01 January 2008 |
Allows you to lock & unlock all the remote control and front panel keys.
Download
Homepage
Author: EMJB
| |
Be first to comment this article | Views: 3249 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Classic Asteroids game for Topfield.
Download
Author:
This email address is being protected from spam bots, you need Javascript enabled to view it
|  |
Be first to comment this article | Views: 2943 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Automatically switches to a special audio track when playing back a recording. Can be used for example to switch to the DD track.
Download
Author: Happy (Till Hepke)
| |
Be first to comment this article | Views: 3925 |
|
|
TAPs
|
|
Sunday, 09 September 2007 |
Searches old recordings and deletes them.
Download
Other/older versions:
Download English version from Dave
Author:
This email address is being protected from spam bots, you need Javascript enabled to view it
| |
Comments (1) | Views: 4854 |
|
|
TAPs
|
|
Friday, 27 October 2006 |
Be first to comment this article | Views: 1618 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Eliminates the aspect option that isn't required for your TV type when toggling with the zero key. So for 4:3 TVs, it will cycle thru Letterbox and Centre Cut, for 16:9 TVs it will cycle between 16:9 and Centre Cut, using the "0" key on the remote. TAP has also the option to get rid of those white VBI signalling lines above and below the image when viewing 16:9 in 4:3 letterbox mode.
Download
Homepage
Author: Tony
|  |
Be first to comment this article | Views: 4405 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Searches old recordings and deletes them.
Download
Author:
This email address is being protected from spam bots, you need Javascript enabled to view it
| |
Be first to comment this article | Views: 1724 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Be first to comment this article | Views: 1592 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Be first to comment this article | Views: 2262 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Views JPEGs as a slide show while MP3 decoding or radio mode.
Download
Author: Topfield
| |
Be first to comment this article | Views: 1852 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Be first to comment this article | Views: 2943 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Be first to comment this article | Views: 1599 |
|
|
TAPs
|
|
Wednesday, 31 October 2007 |
Shows bitrate.
Download
Author:
This email address is being protected from spam bots, you need Javascript enabled to view it
| |
Be first to comment this article | Views: 3686 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Shows a black bar at the bottom of the screen to hide the sometimes enervating scrolling text on some news channels.
Download
Homepage
Author: Chris Ghisler
|  |
Be first to comment this article | Views: 2525 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Displays many more or less useful information of your Topfield PVR like memory heap size, time, information of channels, current event and signal strength and quality.
Download
Homepage
Author: Tony |  |
Be first to comment this article | Views: 4610 |
|
|
TAPs
|
|
Thursday, 14 September 2006 |
Be first to comment this article | Views: 2524 |
|
TAPs detailed A-Z 
